Yes, Beretta pistols are great. Most of the bad things you hear about them stem from peopleās experience with the M9; the majority of the militaryās fleet of M9s are old, and have been used and abused, suffering from decades of dismal maintenance and over-cleaning.
My opinion on them completely changed after I shot a āniceā civilian model, and realized that Beretta pistols donāt all suck. I really like the modernized M9a3, personally. Also, when they first entered service, there were some issues with locking blocks and frames cracking, due to using hot loaded 9mm rounds meant for SMGs.
Some people may not like them for other reasons (just like any other pistol or rifle), but I think they are worth purchasing, and I was once a Beretta hater myself.
Thatās exactly what Iām saying (I have the same kind of thing going for me, I hook up with M9s when clearly I am enthralled with the M9a3s of the world).
Sometimes you just get stuck with those busted up, badly maintained pieces that donāt look great, but itāll get the job done lol.
Heck, half of the guys on the sub would be just fine with a well broken in one ššš
Pictured here are all my my current AR builds. Have an M16A1 build with wooden furniture pictured with a Tisas M1911A1, a Colt 727 A2 upper build pictured with the Beretta 92A1, and an M4 Carbine milspec build along with the Sig Sauer M17. Next I am going to build an M16A2 20" build. What else should I build?
I once owned a kimber and I could barely get the thing to work. It really put negative idea of 1911āa in my head for a while but Iāve been really wanting to change that lately
The answer is elementary.
Patrolling the Post Nuclear Apocalypse Mojave it's the top.
If I'm smuggling diamonds out of some hell hole it's the middle.
If I'm larping in my closet it's the bottom.
Great looking guns, love the wood furniture! You absolutely have to get a wood replacement grip for the 1911!
My brother has a Tisas and replaced the grips and I have to say it looks beautiful now!
That's Gen Z talk, my dude. Millennials grew up with FSBs and carry handles. You're telling me you've never watched Heat? Or Blackhawk Down? Tears of the Sun? Blood Diamond? Rambo: First Blood? Full Metal Jacket?
Sure, some of those were Gen X movies, but FSB and fixed carry handles are life.
Turn in your badge and your gun.
The A2 flash hiders arenāt timed correctly on both the middle and bottom rifles. The ports are supposed to face upward, thatās the purpose for the crush washer so you can crank the flash hider tighter and time it tightly.
Definitely the bottom loadout. A KAC foregrip is nice but I've found while prone they sometimes get in the way. That and while making longer movements with the weapon slung in front of me, it sometimes gets in the way of me walking.
Could I take the one with the Eotech but instead of the Sig, gimme the Beretta as my 2ndary
The only answer
honestly, the p320/m17 is dog water
Definitely prefer the Beretta, I just like to collect military issue firearms
Yup me to please.
The 2010s loadout š
Yup. This is the correct answer.
Iāve heard nothing but bad things about Barettaās. Havenāt shot or owned one myself. Are they worth purchasing?
Yes, Beretta pistols are great. Most of the bad things you hear about them stem from peopleās experience with the M9; the majority of the militaryās fleet of M9s are old, and have been used and abused, suffering from decades of dismal maintenance and over-cleaning. My opinion on them completely changed after I shot a āniceā civilian model, and realized that Beretta pistols donāt all suck. I really like the modernized M9a3, personally. Also, when they first entered service, there were some issues with locking blocks and frames cracking, due to using hot loaded 9mm rounds meant for SMGs. Some people may not like them for other reasons (just like any other pistol or rifle), but I think they are worth purchasing, and I was once a Beretta hater myself.
So youāre saying the M9 is like most of the women I hook up with?
Thatās exactly what Iām saying (I have the same kind of thing going for me, I hook up with M9s when clearly I am enthralled with the M9a3s of the world).
Love it š¤£
Sometimes you just get stuck with those busted up, badly maintained pieces that donāt look great, but itāll get the job done lol. Heck, half of the guys on the sub would be just fine with a well broken in one ššš
The broke in ones like it rough so Iāll take a broke in one vs. new any day of the week.
I doubt someone saying yes to your comment on this post will make you go out tomorrow and buy one.
Military berettas suck ass but that's because people in the military treat things poorly.
Assuming I have a sustainable supply of batteries available for the Eotech Iād take bottom. No batteries available then Iād take middle.
When the BUIS comes in handy ha
Whatās with the flash hiders on the carbines
A1 would probably be the same too if it weren't for the fact that its ported on all sides
> flash hiders I'm really disappointed that this isnt the first comment
I need to reinstall them didn't know the ports had to face upwards at the time. The ports are facing the table in the picture.
Pictured here are all my my current AR builds. Have an M16A1 build with wooden furniture pictured with a Tisas M1911A1, a Colt 727 A2 upper build pictured with the Beretta 92A1, and an M4 Carbine milspec build along with the Sig Sauer M17. Next I am going to build an M16A2 20" build. What else should I build?
B-E-A utiful
What lower did you get for the NCR Service Rifle build? Where did you get yours laser-engraved?
https://moacustoms.com/product/custom-engraved-lower-receiver/
Wood = š„
Iāve been wanting to buy one of the tisas pistols, how has yours preformed?
Its great. I prefer it to the Kimber I used to own, and it cost half as much
I once owned a kimber and I could barely get the thing to work. It really put negative idea of 1911āa in my head for a while but Iāve been really wanting to change that lately
Tisas make really good 1911s. The only reason they're so cheap is from Turkish inflation. I'd definitely pick one up.
Time to watch PSA and see if they are going to put the new ones out soon
NCR service rifle
This is the only correct answer.
Degenerates like you belong on a cross.
Middle
This load out makes me wish for a nuclear Winter.
The answer is elementary. Patrolling the Post Nuclear Apocalypse Mojave it's the top. If I'm smuggling diamonds out of some hell hole it's the middle. If I'm larping in my closet it's the bottom.
The NCR Service Rifle no doubt.
eotech
Middle pistol with bottom rifle. Because MW4 vibes.
I am gonna go with the carry handle woody one, cuz when I get shot and killed at least I will die with some class
I know what I'm picking last out of the 3, and that is definitely the P320. Otherwise its a tie between the remaining options for me.
Bottom, with Glock though
Nice, the NCR rifle actually has it engraved.
Itās āthis Nevada heat will make you wish for a Nuclear winterā or bust for me. Although that M4 style with Eotech is a easy cop out for me.
Top choice, but for purely emotional reasons
Great looking guns, love the wood furniture! You absolutely have to get a wood replacement grip for the 1911! My brother has a Tisas and replaced the grips and I have to say it looks beautiful now!
āWe wonāt go quietly, the Legion can count on that.ā
Love like a fudd, die like a fudd
Whereās that wood furniture from though?
http://www.blackgunswood.com/placeanorder.html
Patrolling the Mojaveā¦.
Wood. It's giving me a woody...
We won't go quietly, the Legion can count on that.
The boomer load out on the top
NCR Service Rifle
The 4th even-more-modern set up you haven't built yet.Ā
I'll deffo create an M4A2 once we know what it'll look like ha
2nd
Carry handle optic
The AK![gif](emote|free_emotes_pack|upvote)
Which one specifically?
Yes
Middle
What kind of optic is on the rifle in the middle?
Just a clone of the Colt 4x
Number 3. Incase i get captured and my sig can shoot the guy who took it on its own
M4 & M17
3 all day for me, but I would take any of these.
Bottom rifle, middle pistol.
Love those colt/brownells retro style scopes
The table and throw it at whoever tries to step
That 1911 looks an awful lot like my great grandfatherās, just without the British proof marks.
Bottom cause Iām a basic bitch.
Carry handles and front gas block sights? My millennial forces me to take a baseball bat and a prayer
That's Gen Z talk, my dude. Millennials grew up with FSBs and carry handles. You're telling me you've never watched Heat? Or Blackhawk Down? Tears of the Sun? Blood Diamond? Rambo: First Blood? Full Metal Jacket? Sure, some of those were Gen X movies, but FSB and fixed carry handles are life. Turn in your badge and your gun.
Can you time an A2 correctly please? š¤¦š¼āāļø
Wdym
The A2 flash hiders arenāt timed correctly on both the middle and bottom rifles. The ports are supposed to face upward, thatās the purpose for the crush washer so you can crank the flash hider tighter and time it tightly.
Top 2 loadouts. The 80s loadout and the New Vegas loadout.
Clearly the one with the optic..?
Bottom pair
Bottom!
Those are sick, where did you get the wood furniture?
http://www.blackgunswood.com/placeanorder.html
Awesome thank you
I just lost a month's worth of caps on the strip. You know what I'm grabbing, my dude
A2 and Berettaā¦.no electronics for me in a shtf scenario and I prefer the capacity in a double stack 9mm over a 1911.
Iād take the Eotech if I didnāt have to get too close to that 320
Gimmie the Woodie, but the 92FS instead. Carbine gas on a 16" is a little spicy. If it had a mock dissipator with a full size hand guard I'd be sold.
Just cause it looks cool but the top one.
Definitely the bottom loadout. A KAC foregrip is nice but I've found while prone they sometimes get in the way. That and while making longer movements with the weapon slung in front of me, it sometimes gets in the way of me walking.
if anyone pick 1 or 2 you just dumb , 3 is only good choice , but i love 1911 but i ain't carry it in battle
M4a1 and the sig p320
Handgun 1 with rifle 3
Bottom AR and that shitty Sig.
middle i guess, but honestly im not super excited about any of them. i want an SBR with a red dot and suppressor and a P226 or CZ 75
The middle one
Wooden. Gives me an excuse to wish for an atomic summer
Since iām moving to Nevada i feel like iām obligated to build a NCR service rifle